SOLAR WATER HEATER (COMPLETE SYSTEM)

The system of the solar water heater can be grouped by different parts and accessories, according to different climate or any other specific request. Please send a simple description of the solar heater system you like and we can send the price.

Parts of the solar water heater:

1. Solar Collector (Panel): Please indicate which model of collector is suitable for your home.
2. Storage tank: Please advise the capacity of the tank you need, 120L/200L/240L/300L
     Our regular solution for the tank is:
   
   • Inner tank: 1.5mm SUS304
   • Outer tank: 0.6mm Steel with multicolor painting.
   • Insulation: 50mm polyurethane foam
   • Working pressure: 6.5 bar.
3. Heat Exchanger (if needed)
4. Circulation pump.
5. Controller.
6. Element (electronic heater)
7. Valve, connection and other accessories.

Imagine free hot water for life

SOLAR WATER HEATER (SPLIT SYSTEM)

The tank can be placed anywhere inside or outside the house. Just the collector goes on the roof.

The system comes complete with electronic controller, electrical backup and circulation pump.

There are three sensors on the system, one at the top of the tank, one at the bottom of the tank and one on the collector. If there is more than an 8 degree difference between the three sensors, the system circulation pump will run automaticaly.

Parts for Split Closed Loop Solar Water Heater

Introduction to the Absorber Plate

We apply the world advanced technology in the absorber plates, such as electroplated black chrome.
Magnetic Sputtering Coating, Ultrasonic welded Technology.

The absorber plates feature high efficiency, firm structure and elegant appearance.

Models & Specifications:

MODEL NO.: SYAP-01

• Copper fin of nickel coated bottom and selective black chrome surface.
• Absorptivity: 95% Emission: <8%
• Fin standard dimension: 1880 length x dia. 10 x 0.5 thickness (mm)

MODEL NO.: SYAP-02

• Copper fin of Selective magnetic sputtering Coating
• Absorptivity: 95% Emission: <6%
• Fin standard dimension:  1840 length x 125/140 width x 0.16 thickness (mm)
• Copper tube standard dimension:  1880 length x dia. 10 x 0.5 thickness (mm)

MODEL NO.: MSAP-01

• Copper fin of selective absorb film paint.
• Absorptivity: 95% Emission: <20%
• Fin standard dimension:  1840 length x 125/140 width x 0.16 thickness (mm)
• Copper tube standard dimension:  1880 length x dia. 10 x 0.5 thickness (mm)

MODEL NO.: MSAP-03

• Aluminum fine with black anode oxidation surface
• Absorptivity: 95% Emission: <30%
• Fin standard dimension:  1840 length x 122 width x 0.6 thickness (mm)
• Copper tube standard dimension:  1880 length x dia. 10 x 0.5 thickness (mm)

Specifications can be modified according to specific application or request.

Solar Flat Plate Collector